หน้าแรก > Expanded PTFE Tape Joint Sealant

Expanded PTFE Tape Joint Sealant

Technical properties

Temperature range          : - 268° to + 268°C (-450°F to+450°F)

Pressure range                : up to 3000 psi (~20Mpa)

Elongation                      : 20%

Matrix tensile strength   : 30Mpa

Chemical resistance       : all media pH 0-14 except molten alkali metals and element fluorine.

Applications

- flange

- rough or irregular surfaces

- pump and compressor housings

- heat exchangers and boiler

- manway covers

- ventilator

- food services & processes

  

Features/Benefits

- self-adhensive / easy to work

- simple and easy to install and  to reduce downtimes

- stock reductions / reduces inventory for cut gaskets.

- chemical and temperature resistant.

 

 

                                                                        Joint sealant nominal width            Thickness length of sealant tape

  (mm)   (inches)     (mm)   (m)
  3   1/8            1.5   50
                                                                       5   3/16     2.0   50
                   7   1/4                                          3.0   50
  10   3/8     3.0   50
                                                                                 14   1/2     5.0   25
  17   5/8     5.0   10
  20   3/4     5.0   10
  25   1     10.0   5/50

 

                           

- Clean the sealing surface, remove old sealing remains, and check for

damage.

- After the sealing surface is cleaned and fat-free, position the sealant

tape in the middle of the sealing surface.

- When applying the sealant tape, progressively remove the adhesive

protective tape. Make sure that the adhesive is not soiled or damaged

during installation, this can influence the positioning of the tape.

- Position the end of the sealant tape around the starting bolt hole.

Complete the installation by overlapping both ends of the sealing tape at 

the starting bolt hole, ant cut away any excessive material.
 

 

 

Visitors: 62,966